This story happened at my home; I pressed the clutch pedal before starting the engine, but instead of usual slight resistance I heard some weird noise and the pedal fell in. After visual check...
Detach the accumulator terminal. To remove the fuel tank sending unit, unscrew the two screws that hold the first aid kit body on the back shelf (closer to the back seat).
On the photos 1 and 24 you can see how a control pressure regulator (CPR) looks like.
To begin with we need to make up our mind on what type of a sunroof we are going to disassemble and up to what condition. The procedure of disassembling a mechanical sunroof is...
I wanted to fill in the gaps in knowledge and get and idea of how the K-Jetronic system looks like from inside for a long time already. As the KE system has been described...
The reason for replacing my bottom left suspension arm is its complete unworthiness due to it being bent after my vehicle has crashed into a concrete street curb.
I purchased all this for the full body repair of the 126 model. Was simply tired of doing it with an angle grinder – the quality is poor and you can’t get access to...
The time has come to replace the break lines – the front right one started leaking and it’s my luck that it didn’t blow out on the way. The break lines prices vary and...
Regarding the back springs – you will need scaffolding and 1,5-2 hours to replace both of them. Unscrew the upper screw-nut that holds the shock absorber.
Sometimes you may face a situation when the generator brushes are out of repair, yet the generator itself is still in good condition. In order not to buy a new generator, which is pretty...
Recent Comments